← All articles

How to Calculate Percentage Change

When a value moves from 80 to 100, the difference is 20. That tells you how much it changed, but not how large the change is compared with the starting value. Percentage change expresses the difference relative to the original: in this example, the increase is 25%.

Use the percentage change calculator to compare two values, or follow the steps below to check the result yourself.

Start with the original value

The formula is (new value − original value) ÷ original value × 100. Use matching units and comparable periods: compare weekly visits with weekly visits, not with a monthly total. Decide which value came first before calculating.

  1. Subtract the original from the new value to find the numerical difference.
  2. Divide that difference by the original value.
  3. Multiply by 100 and label the result as an increase, decrease or no change.

Example: visits rise from 240 to 300

The difference is 300 − 240 = 60 visits. Divide 60 by 240 to get 0.25, then multiply by 100. Visits increased by 25%. In the calculator, enter 240 as the original and 300 as the new value.

Example: a file shrinks from 500 KB to 350 KB

The difference is 350 − 500 = −150 KB. Dividing −150 by 500 and multiplying by 100 gives −30%. The file size decreased by 30%. Keep the units consistent: converting both measurements to bytes before comparing can avoid confusion between KB and KiB.

Examples using a positive original value
OriginalNewDifferencePercentage change
80100+2025% increase
10080−2020% decrease
404000% change
750−75100% decrease

An increase and its reversal are different percentages

Moving from 80 to 100 adds 20, which is 25% of 80. Moving back from 100 to 80 removes the same 20, but it is 20% of 100. The difference in percentages comes from the changed denominator. Keep this in mind when comparing before-and-after measurements.

Percentage change versus percentage points

If a completion rate moves from 10% to 12%, subtracting the rates gives 2 percentage points. The relative increase is (12 − 10) ÷ 10 × 100 = 20%. Both descriptions are valid, but they describe different things. State which one you mean when reporting a result.

What if the original is zero or negative?

A percentage change from zero is undefined because the formula divides by the original value. If visits go from 0 to 30, report an increase of 30 visits rather than assigning an ordinary percentage growth figure. A decrease from a positive value to zero, however, is a valid 100% decrease.

Negative baselines need special interpretation. For example, going from −20 to −10 increases the number, but the usual formula returns −50%. This calculator excludes negative original values to avoid implying a simple growth result. Use the numerical difference and the context when a baseline is negative.

Check precision and comparability

Round only the final result when possible. The calculator displays up to six decimal places and uses standard browser number precision. Very small results use scientific notation. Extremely large results may be rejected. For records requiring exact decimal accounting or scientific precision, use a calculation method suited to those requirements.

Before sharing a result, include the original and new values, their units, the comparison period and the rounded percentage. If you instead need to find 15% of a number, use the percentage-of-a-number calculator.

Calculate percentage change